热搜词:冷凝器  冷凝器厂家  列管式冷凝器  不锈钢冷凝器  半盘管反应釜  搪瓷设备  储罐  

当前位置:
首页 > 技术知识

厂家总结列管式冷凝器的维护技巧

人气:6 评论:0 日期:2019-01-12 22:17:13

列管式冷凝器是一种使用较为广泛的冷凝设备,该设备的结构简单坚固且制作过程也很容易,冷凝器的处理能力比较大且适应性强。那么,为了保证它能够更好的为我们创造使用价值,我们在日常使用中应该怎样做好它的维护工作呢?下面就来一起了解一下吧!总之,想要让列管式冷凝器能够更长久的为你创造价值的话,就应该对它做好定期的维护保养工作,这样才能降低其出现故障的概率,从而在一定程度上也能够更好的延长它的使用寿命。

Tube condenser is a widely used condensation equipment. The structure of the equipment is simple and solid, and the manufacturing process is easy. The processing capacity of the condenser is relatively large and adaptable. So, in order to ensure that it can create better use value for us, how should we do its maintenance work in daily use? Now let's solve it together. In short, if you want to make the tube condenser create value for you for a longer time, you should do a good job of regular maintenance, so as to reduce the probability of its failure, and to a certain extent, it can also better extend its service life.

1、内部清洁:根据列管式冷凝器的使用要求,采用合适的清洗设备,清洗剂是用来清洗内部,或者压缩气体吹到入口和出口,油标与内墙积累都清理出来,然后一定量的液压油倒进墙内并清洗。

1. Internal cleaning: According to the use requirements of tubular condensers, appropriate cleaning equipment is adopted. The cleaning agent is used to clean the interior, or compressed gas is blown to the entrance and exit. The accumulation of oil marks and interior walls is cleaned out, and then a certain amount of hydraulic oil is poured into the wall and cleaned.

2、检查一下机油是否漏水:一个常见的漏油问题也很容易找到。检查所有的接口和油管。如果有漏油就会渗出。检查紧固件连接是否松动,及时更换新零件,或对密封件进行加密。

2. Check whether the oil is leaking: A common oil leak problem is also easy to find. Check all interfaces and tubing. If there is an oil leak, it will leak out. Check whether the fastener connection is loose, replace new parts in time, or encrypt the seals.

3、列管式冷凝器是否裂纹:在修复过程中,如果在芯体中存在裂纹,则可能是长时间或不足的压力。维修人员应将其拆除,严格检查裂缝,如果问题不够大,重新安装裂纹。裂纹严重,建议直接向专业厂家更换新的冷凝器

3. Whether the tubular condenser is cracked or not: In the repair process, if there is a crack in the core, it may be a long time or insufficient pressure. Maintenance personnel should dismantle it, strictly check the cracks, if the problem is not big enough, reinstall the cracks. It is suggested to replace the new condenser directly from the professional manufacturer because of the serious cracks.

4、焊接修补

4. Welding repair

当列管式冷凝器外壳出现损伤时,应采用焊接修补这一方法来进行,即为,在其壳体损伤或裂纹处,使用手砂轮磨出一道凹痕,然后进行堆焊操作,之后,则是用手砂轮将焊口磨平,即可。

When the shell of tubular condenser is damaged, it should be repaired by welding. That is to say, at the damage or crack of the shell, a dent is grinded by hand grinding wheel, and then surfacing operation is carried out. Then, the weld is grinded flat by hand grinding wheel.

5、焊接盲堵

5. Blind plugging in welding

主要是针对列管式冷凝器管壁的泄漏。由于该冷凝器的列管采用的是无缝钢管,因此,是可以用钢质锥堵镶入管两端孔内,然后将锥堵与管子焊牢即可。而且,这一修补方法,对冷凝器来讲,也是有很好的修补效果的。

Mainly for the leakage of tube wall of tubular condenser. Since the tube of the condenser is made of seamless steel tube, it is possible to insert the steel cone plug into the holes at both ends of the tube, and then weld the cone plug firmly with the tube. Moreover, this repair method has a good repair effect for the condenser. 


辛苦整理!转载请注明来自 http://www.zqshzb.com/n1b/3087.html

相关文章

技术知识

联系中骐石化

0510-85390527